CHIAN SENG MACHINERY TOOL CO., LTD.
886-4-7712069
886-4-7714655
No. 38, Alley 231, Cao Jhong Lane, Lugang Township, Changhua, Taiwan
http://www.chian-seng.comProducts
Carbide Tipped Cutter Tool
Ball Nose End Mill
AOT
Ball Nose End Mill is for various kinds of curved surface machining and arc groove machining. The side edge of Ball Nose End Mill does not mill and only the tip is milling.
Specification
| Part No. | Diameter (D1) | Corner Radius (R) | Flute | Shank Diameter (D2) | Overall Length (L) |
| AOT127 | 1/2" | 6.35 | 2 | 16 | 95 |
| AOT15875 | 5/8" | 7.938 | 2 | 16 | 95 |
| AOT1905 | 3/4" | 9.525 | 2 | 20 | 110 |
| AOT22225 | 7/8" | 11.11 | 2 | 20 | 120 |
| AOT254 | 1" | 12.7 | 2 | 25 | 125 |
| AOT28575 | 1-1/8" | 14.288 | 2 | 25 | 125 |
| AOT3175 | 1-1/4" | 15.875 | 2 | 32 | 125 |
| AOT381 | 1-1/2" | 19.05 | 2 | 32 | 130 |
| AOT508 | 2" | 25.4 | 2 | 32 | 130 |
| AOT14 | 14 | 7 | 2 | 16 | 95 |
| AOT15 | 15 | 7.5 | 2 | 16 | 95 |
| AOT16 | 16 | 8 | 2 | 16 | 95 |
| AOT18 | 18 | 9 | 2 | 20 | 115 |
| AOT20 | 20 | 10 | 2 | 20 | 115 |
| AOT21 | 21 | 10.5 | 2 | 20 | 115 |
| AOT22 | 22 | 11 | 2 | 20 | 115 |
| AOT24 | 24 | 12 | 2 | 25 | 115 |
| AOT25 | 25 | 12.5 | 2 | 25 | 125 |
| AOT28 | 28 | 14 | 2 | 32 | 130 |
| AOT30 | 30 | 15 | 2 | 32 | 130 |
| AOT32 | 32 | 16 | 2 | 32 | 130 |
| AOT36 | 36 | 18 | 2 | 32 | 130 |
| AOT38 | 38 | 19 | 2 | 32 | 130 |
| AOT40 | 40 | 20 | 2 | 32 | 130 |
| AOT50 | 50 | 25 | 2 | 32 | 130 |
| AOT60 | 60 | 30 | 2 | 32 | 140 |
